S1 Long Range

The S1 LongRange was designed to meet the needs of high demands internet connectivity. The S1 provides a dedicated radio that is used only for scanning and connecting with nearby WiFi networks. This alleviates the strain of the S3 / S4 working double duty to simultaneously provide a local hot-spot & connectivity to outside WiFi networks. [Image of network setup] [Image of S1 for reference]

The S1 is capable of reaching WiFi networks as far as 7 miles away but typically performs best within 4-5 miles. Depending on the sensitivity of the transmitting / receiving antennas of the external WiFi network’s hardware along with conditions & line of sight, results may vary.



The S1 was designed to be simple for installation. Both power and data travel along one CAT-5 cable from the 5th port (yellow port) on the S4, making installation a breeze. The S1 is automatically recognized & configured from the S4 and fully controllable from directly within the S4 control panel or iCommand App.

Specifications:

CPU nominal frequency
CPU core count
Architecture
Size of RAM
10/100 Ethernet ports
Wireless chip model
Wireless standards
PoE in
Supported input voltage
Voltage Monitor
PCB temperature monitor
Dimensions

Tested ambient temperature
License level
CPU
Max Power consumption
Number of chains
Storage type
Storage size
400 MHz
1
MIPS-BE
64 MB
1
AR9283
802.11b/g/n
Yes
24 V – 30 V
Yes
Yes
177x44x44mm, 193g

-30C to +70C
4
AR7241
11.5W
1
NAND
64 MB
in Connectivity Equipment